XINCOL N5 12V Car Portable Jump Starter Ultra Thin Power Bank 400A Peak 8000mAh Multifunctional 12V Car Universal Powerbank Starter Mobile Power Supply

XINCOL N5 12v Portable Car Jump Starter is able to jump start 12V vehicles (within 2.5L petrol engine) with 400A peak current. With a built-in protection circuit, make sure you and your loved ones can get home when stranded. Additional Features: 1.Mobile Charging: As a car jump starter, it has abundant functions. Xincol N5  12V portable car jump starter comes with a 5V/2.1A USB output to charge your cellphone, tablet, action camera, etc. during travel. XINCOL N5 portable car jump starter has LED number display power indicator, it can be charged both at car or at home. 2.XINCOL N5 Portable Car Jump Starter has a starting current of 200A can start the 12V vehicle. (gasoline vehicle, displacement <1.8L) 3.LED Flashlight: The ultra bright LED flashlight can switch between lighting, strobe and SOS modes freely under different circumstances.With 3modes of LED light (torch/SOS/strobe) Operation Steps: 1. Correctly connect clamps with battery terminals. 2. Make sure the power of jump starter is at least 75%;Connect the clamps to EC5 pocket. 3. Start the engine. 4. Pull the clamps out off the jump starter. Technical Data Xincol Car Jump Starter N5  Starting vehicle: 12V Charge mode: CC/CV 15V/1A USB output: 5V/1A Start-up current: 200A Max current: 400A (3S) Charging time: 4-5 hours Cycling life: 1,000 times Product Dimension:135*75*17mm Temperature: -20℃-60℃40PCS/CN N.W.: 0.223kg/pc G.W:0.67kg/pc CN Size:54*56*32cm 29.5kg/CN Indicator Lights Press the switch button to check the capacity of Jump Starter For jump start of 12V vehicle: 1. Make sure that the number of indicator light is not less than 3 2. Connect the red battery clamp of jumper cable to the vehicle’s positive ( ) battery terminal and connect the black battery clamp of jumper cable to the vehicle’s negative (-) battery terminal. 3. Plug the cord of jumper cable into the jump start socket 4. Start the vehicle 5. When the vehicle starts, remove jumper cable from Jump Starter and disconnect red and black clamps to the vehicle battery terminals within 30 seconds 6. Leave the vehicle’s engine running